• Before winter: boiler servicing and repairs, boiler and air-conditioning installation. Approved PEB technician in the Brussels Region.
Book a visit

Bathroom

Replacing a bath with a shower: how?

In short

Yes, in most bathrooms a bath can be replaced with a shower. What decides the solution is mainly the drainage: where the waste pipe runs and how much fall is available determine whether you get a shower tray or a walk-in, floor-level shower. A visit on site settles this before the quote; our service area page shows where we work.

Can any bath be replaced with a shower?

Almost always, but three things need checking before you choose a model:

  • Drainage: where is the waste stack, and how much fall can the pipe have to reach it? A floor-level shower needs more depth under the floor than a raised shower tray.
  • Water supply: the hot and cold supply pipes have to be moved to the new taps, often at a different height from the bath taps.
  • The space freed up: the bath’s footprint gives the length; the width and access decide the type of screen or door (fixed, hinged, sliding).

Shower tray or floor-level shower: what is the difference?

Raised or low-profile shower tray Walk-in, floor-level shower
Access a small step no threshold
Drainage simpler to connect needs enough fall under the floor
Floor work limited to the shower area the whole area must be relaid and waterproofed
Look classic, easy to clean seamless, makes the room feel bigger

The right choice depends as much on the building (timber floor, concrete slab, upper storey) as on your taste: that is what the technical visit is for.

How is the work carried out?

  1. Visit and quote: survey of the supply pipes, the drainage and the dimensions, and choice of shower type.
  2. Removal of the bath, its side panel and the surrounding tiles.
  3. Plumbing: moving the supply pipes and connecting the waste, with the necessary fall.
  4. Waterproofing of the shower area (the floor and any walls exposed to splashes).
  5. Fitting of the shower tray or tiled floor, the wall tiles, the taps and the screen.
  6. Commissioning: drainage tests and a check that the connections are watertight.

How long will you be without a bathroom?

That depends on the scale of the work (a simple tray or a fully relaid floor) and on the drying time of the waterproofing products. We give you the duration with the quote, after the visit. If you only have one bathroom, let us know: we plan the job around it.

Does the whole bathroom need redoing?

No. We can replace just the bath and redo the tiling in that area, or use the opportunity to renovate the whole room. If the existing tiles can no longer be matched, at least one full wall is often retiled.

To find out more about our work, see our bathroom renovation page, and for the pipework, the plumbing page.

Sources

  1. Comment remplacer sa baignoire par une douche (La Maison Saint-Gobain, updated 23 July 2026, in French) (checked on )

Read also

  • Plumbing

    Protecting your plumbing from frost

    Exposed pipes, water meter, outdoor taps: how to protect your plumbing from frost, and what to do if a pipe freezes or bursts.

    2 min read

  • Boilers and heating

    Boiler not working: what to check first?

    Boiler breakdown in winter: the simple, safe checks to make before calling a technician, and what to do if you smell gas or suspect carbon monoxide.

    4 min read

  • Boilers and heating

    Heating: what to check before winter?

    Bleed the radiators, check the pressure, have the boiler inspected: what is worth doing before winter, and the rules in Brussels.

    4 min read

Updated on November 12, 2026